Cathodic Protection (CP)
Turnkey sacrificial anode and active impressed current (ICCP) systems. Verifying and preserving subsea structures against galvanic corrosion.
Preserving subsea metals through advanced electrochemical engineering
Submerged steel and concrete marine foundations face aggressive, constant corrosion. Commercial Marine Group integrates advanced electrochemical modelling with 100% ADAS-certified divers and specialist marine vessels to design, install, survey, and maintain robust cathodic protection systems. We safeguard legacy wharves, bridge piers, and vessel hulls across Australia’s busiest waterways.
Cathodic Protection Capabilities
Statutory compliance. Electrochemical diagnostics.
GALVANIC (SACRIFICIAL) ANODE SYSTEMS
Engineering and installing high-performance zinc and aluminium alloy anode grids to provide reliable, self-powered corrosion protection for sheet pile walls, steel piles, and offshore structures.
IMPRESSED CURRENT (ICCP) SYSTEMS
Designing, retrofitting, and maintaining active Impressed Current Cathodic Protection (ICCP) networks. Best suited for massive container berths, deepwater wharves, and large commercial shipping vessels.
SUBSEA POTENTIAL SURVEYS (AG/AGCL)
Deploying commercial divers and ROVs to execute high-fidelity potential mapping, checking real-time polarization levels across critical subsea sheet piles and jackets.
SPLASH-ZONE WRAPPING & SHEATHING
Installing durable pile wrapping systems (such as Denso SeaShield arrays) to provide absolute barrier protection for piles located in the highly aggressive splash and tidal zones.
STRAY CURRENT INTERFERENCE MITIGATION
Auditing and grounding stray electrical currents leaking from dockside light rail systems, shore-power grids, or welding units to stop rapid galvanic steel destruction.
ANODE RETROFITS & LIFE EXTENSIONS
Deploying ADAS commercial divers and high-capacity barges to weld or clamp new sacrificial anodes onto aged maritime structures, extending their operating life by up to 30 years.
Electrochemical Corrosion Mitigation
Protecting heavy harbor assets demands structural engineering combined with electrochemistry. CMG’s active corrosion control framework integrates safe diving execution, RPEQ design modelling, and high-performance monitoring to guarantee complete subsea protection.
GALVANIC ANODE RETROFITS
We model localised current densities and place high-capacity aluminium and zinc anodes to extend harbour structure life by 20 to 50 years.
SUBSEA POTENTIAL PROFILING
Our commercial divers execute potential audits using calibrated reference cells, mapping structural polarisation against AS 2832.3 guidelines.
STRAY INTERFERENCE AUDITS
Tracing dockside stray electrical leakages from shore-power connections, installing dedicated earthing systems to halt fast metal electrolysis.
Frequently Asked Questions
Technical insights regarding our cathodic protection, potential surveys, and corrosion controls.
How does CMG verify if a steel pile or sheet pile wall is fully protected against subsea corrosion?
In accordance with Australian Standard AS 2832.3, we verify cathodic protection through subsea potential measurements. ADAS-certified divers or ROVs position a calibrated silver/silver-chloride (Ag/AgCl) reference cell directly against the submerged steel structure. To certify full corrosion control, the measured electrical potential must shift to a protective voltage of -800mV or more negative (or -900mV in anaerobic soils containing sulfate-reducing bacteria). Additionally, we perform 100mV polarization decay tests to confirm the steel holds a protective charge even when temporarily disconnected from its current source.
What is the difference between Sacrificial Anode (Galvanic) and Impressed Current (ICCP) systems, and when does Commercial Marine Group use each?
Sacrificial (Galvanic) systems use highly active metals like aluminium or zinc that corrode naturally to protect steel. They are simple, self-powered, require zero electrical maintenance, and are highly reliable for isolated steel piles, bridge piers, and smaller wharves. Impressed Current (ICCP) systems, on the other hand, use an onshore power source to actively pump direct current through inert anodes. ICCP systems are adjustable, can protect massive, complex berths, and have a longer service life, but they require continuous electrical monitoring and are vulnerable to power outages or stray current interference.
How does Commercial Marine Group remediate splash-zone corrosion where traditional subsea cathodic protection cannot reach?
Because cathodic protection relies on seawater to carry electrical currents, it cannot protect steel above the low-tide mark. This makes the splash zone—which is exposed to continuous moisture and oxygen—the most aggressive corrosion zone. We remediate this by installing multi-layer barrier wrapping systems, such as Denso SeaShield arrays. Our divers clean the pile, wrap it in a petrolatum-based tape that displaces water, and seal it under a heavy-duty, high-impact HDPE outer sleeve secured with alloy bands. This creates an airtight, anaerobic seal that completely halts corrosion.
How are stray electrical currents identified and mitigated in active commercial berths?
Stray currents from dockside light rail systems, high-voltage shore power, or shipboard welding can escape into the harbor mud and use steel wharves as a path back to ground. Where these currents exit the steel, they cause rapid, aggressive corrosion. Commercial Marine Group identifies this by installing multi-channel data loggers to track voltage shifts between the structure and reference cells over several tidal cycles. Once located, we design and install low-resistance copper grounding systems or isolating flanges to drain and ground the currents safely without damaging the wharf.
How does seawater resistivity and temperature influence CP system performance in QLD and WA?
Seawater temperature and salinity directly dictate water resistivity. In warm, highly conductive open ocean waters (such as WA’s Pilbara region or Cockburn Sound), current flows easily, but warm temperatures also accelerate corrosion rates, requiring a higher current density demand. In contrast, brackish estuaries with fluctuating salinity (like the upper Brisbane River) have higher resistivity, which limits the current flow from sacrificial anodes. Our in-house engineers mathematically adjust anode sizes and spacings to ensure complete, reliable protection across these different marine environments.